Un profilé innovant
Le profilé breveté Clim® permet de générer plusieurs largeurs de fentes périphériques variant de 12 mm à 30 mm.
Thanks to its patented open-work shape, Clim® allows air to flow through it a or by suction b between the volume of the plenum and that of the room. The non-perforated version c of the profile makes it possible to prevent the passage of air on certain walls. When the profile is used for suction, a partition wall d is introduced where the exhausted air is channelled through the air intake, which is supported by the profile.
For even air distribution and optimum comfort
* The Clim® system can be supplied by a terminal unit or an air handling unit. Contact your authorized Barrisol® installer for more information.
1 The room air is drawn in along the inner walls of the room and channelled through a partition wall d supported by the special Clim® profile.
2 The air is drawn into the air conditioning unit*, filtered, heated or cooled before being distributed to the plenum between the Clim® ceiling membrane and the structural ceiling..
3 A ventilation box can be connected to the system to inject hygienic fresh air into the plenum and/or extract room air from the Clim® air intake box d .
4 The conditioned air and the fresh air form a homogeneous mixture, distributed throughout the volume of the plenum.
5 The Clim® ceiling becomes a huge diffuser, radiating over its entire surface.
6 The conditioned air flows slowly down the outside walls.
A ceiling air conditioning system
1 In both summer and winter, the air-conditioning flow touches the outside walls. The unpleasant phenomenon of hot or cold walls disappears.
2 A natural air movement is created in the volume of the room at very slow, almost imperceptible speeds.
3 The entire surface of the ceiling radiates a pleasant, gentle feeling of warmth or coolness.
Use of radiation and convection
Arch. : Bertine Creemers - PUUR Binnenhulsachitectuur
The homogeneous wall temperatures, the combination of natural air movement and the large radiation surface of the ceiling, all contribute to Clim® providing unparalleled comfort in heating and cooling.
The occupants are enveloped by a gentle feeling of coolness or warmth, in complete silence and without draughts.
The ceiling radiation gives the system incredible responsiveness, in only a few minutes the sensation of heat or cold is perceptible.
An Homogeneous ventilation and no point source airflow for healthy air
Clim® allows a perfectly homogeneous air mixing and distribution, without dead zones or punctual air flows, thus ensuring an optimal indoor air quality.
Thanks to the supply and exhaust slots covering the entire length of the walls on opposite sides of the room, the entire interior volume is perfectly swept with a slow and uniform air speed.
An essential factor in indoor air quality, the rate of hygienic fresh air is homogenised at all points of the occupancy volume, which makes it possible to dilute the rate of CO2 in a particularly effective way, as well as all the potential sources of release of pollutants (such as VOCs) or pathogenic agents (such as viruses and bacteria).
C.F.D. (Computational Fluid Dynamics) - Project “Oslo-Plads”, Copenhague - Danemark
Customised calibration through an engineering study for each project
Our thermal engineering department ensures the dimensioning of the Clim® system for each project by carrying out numerical simulations to precisely determine the air speeds and temperature homogeneity within the room. It also ensures the production of 2D or 3D execution plans for the installations.
Very high power capacity and unequalled thermal comfort
(1) without any risk of deformation of the stretched ceiling
(2) without any risk of condensation of the stretch ceiling
(3) up to 130 W/m2 according to tests carried out in the Jean Falconnier laboratory on the Carrier - Culoz site
Thanks to the almost imperceptible air speed and the very small temperature difference between the feet and the head of an occupant, Clim® generates an unequalled thermal comfort with a homogeneity of the wall temperatures and of the air temperature in any point of the room.
Its admissible power, almost unlimited, of 600W/m2 in heating and 550W/m2 in cooling allows it to cover the needs for heating and air-conditioning under all the latitudes of the globe
Even temperature and low air speed
* Tests carried out in the Jean Falconnier laboratory on the Carrier - Culoz site. Additional information available on request / Thermal comfort scale according to ISO 7730
Clim® : Light and durable materials
Our produits Clim® products are composed of a profile structure made of post-recycled aluminium at more than 80% and 100% recyclable, making the raw material reuse circuit even more environmentally friendly.
They integrate the latest generation of Barrisol Biosourcée® sheet, also 100% recyclable and whose plasticizer of vegetable origin enters up to 30% of the total composition.
Composed of light materials, 100% recyclable and recycled for some of theme, Clim® solutions minimise the carbon impact of your buildings, they have a B-s1, d0 fire rating and an air emission A+.
The fabrics in the Biosourced® range contain a plasticizer made from plants. Our eco-citizen approach, for more than 50 years, has consisted in using only 100% recyclable materials.
The plant-based plasticizer is used in the composition of the Biosourcée® satin fabric up to 30% and up to 10% for the translucent version.
The tests guaranteeing air-conditioning were carried out with Biosourcée®, membrane, a product that is ideal for thermal diffusion due to its composition. In addition, Biosourced® membranes comply with with the ODDY test.
Arch.: Agence A+ Architecture
Fully backlit, equipped with Barrisol Light Lines® or incorporating the luminaries of your choice, Clim® ensures the lighting of your premises.
Clim® avec intégration de luminaires
Clim® lumineux
Clim® avec intégration de suspensions
Clim® avec intégration Light Lines®
Easy access to technical equipment
When the technical equipment cannot be moved outside the volume served, a Barrisol access hatch can be discreetly integrated into the ceiling.
Clim® Acoustique
Clim® Lumière Acoustique®
PV available on request
PV available on request
Technical and practical advantages of Barrisol Clim® featuring Carrier® products
Unparalleled comfort for your well-being
- Effective noise reduction
- Sound Absorption
- Very small temperature difference at any point of the room
- Fast and responsive system to achieve the desired temperature
- No draughts
- Thermal comfort Class A cold and Class A hot according to ISO 7730(1)
Includes all technical features
- Cooling and Heating
- Ventilation of premises
- Acoustic and/or illuminated membrane
- Possibility of sound broadcasting
- Possible incorporation of any technical equipment
Safety and health
- Optimal air quality due to even distribution of recirculated air and fresh ventilation air
- Avoids dead zones and point source airflow which can favour the transport and proliferation of viruses and and bacteria
- Compatible with Pure Clim® featuring CarrierR® products UV air sterilisation solution
- The membrane Barrisol Biosourcée® contains up to 30% of a plant-based plasticiser in its composition, which is classified A+ (no emission of volatile toxic substances) and B-s1, d0 (fire classification)
Economic performance
- Saving of energy consumption thanks to the thermal radiation of the Biosourced membrane®
- Eco-responsible (less energy, less material)
- Saves on fan consumption due to low air pressure drop
Combines aesthetics and flexibility
- No unsightly technical elements visible
- Frees up walls and spaces in living areas
- Optimises plenum heights
(1) up to 130 W/m2 according to tests carried out in the Jean Falconnier laboratory on the Carrier - Culoz site
Project example :
OSLO PLADS - Denmark Copenhagen
OSLO PLADS
Nature of the project : New office and retail building
Total project area : 13.000 sqm - 139930.835417 sq ft
Surface Barrisol Clim® products : 6.338 sqm - 68221.664221 sq ft
Project Teams :
Architect
KHR Arkitekter A/S is a Danish architectural firm founded by G. Krohn and E. Hartvig Rasmussen in 1946. Hartvig Rasmussen in 1946. During the 1960s, the company fo- cused on European styles applied to public buildings in Denmark. The company has 44 architects and 5 partners: Anja Rolvung, Jakob Brøndsted, Jan Søndergaard, Henrik Richter Danielsen and Mikkel Beedholm. Several of their projects have been nominated for the European Union Prize for Contemporary Architecture. In 1992, the company re- ceived the NYCredit Architectur award.
Holy Cross Church - Denmark, by KHR
Technical consultancy
NIRAS Gruppen A/S is an international multidisciplinary technical consultancy with head- quarters in Blovstrød, North Zealand, and is the third largest technical consultancy in Denmark. Founded in 1956 by civil engineers Jørgen Kristian Nielsen and Konrad von Rauschenberger, the company employs approximately 2,200 people and carries out projects in most parts of the world from offices in Europe, Africa and Asia. NIRAS’ areas of activity are construction and infrastructure, procurement, environment and nature, climate and energy, and planning and development support.
NIRAS Headquarters - Danemark
Barrisol distributor
Lumiére Stretch Ceiling Denmark A/S est, depuis plus de 20 ans, distributeur de la marque BARRISOL. Elle est spécialisée dans les solutions les plus techniques de la gamme comme la climatisation (Barrisol Clim® featuring CARRIER® products), l’éclairage (Barrisol Light), l’acoustique (Barrisol Acoustic), les plafonds 3D (Barrisol 3D Forms). Grâce à sa double compétence en plafond tendu et en éclairage, l’entreprise conçoit, fournit et installe des solutions d’ambiance uniques sur l’ensemble du Danemark et sur de prestigieux projets comme la Nordea Bank (7500m2 – Barrisol Acoustic) ou encore Novo Nordisk (3500m2 – Barrisol Extramat).
United Cycling Lab Store Denmark, by LUMIERE
Flexibility of the Barrisol Clim® featuring CARRIER® products solution
Implementation of a modular and flexible solution allowing the addition or removal of partitions according to the defined grid. Thanks to the use of the special Barrisol partition profile, the spaces can be converted at will. Terminal units with very low noise level, installed in the false ceiling of technical spaces.
Barrisol Biourcée A15 microperforated ceilings for acoustic treatment.
Performance of the Barrisol Clim® featuring CARRIER® products solution
The realization of a 3D BIM model of the installations, numerical simulations CFD (Computational Fluids Dyna- mics) as well as acoustic studies allowed us to calibrate the Barrisol Clim® featuring CARRIER® products solution according to the requirements of the owner and to simulate the forecast performances.
3D BIM model
Numerical simulation of air speeds
The actual performance was tested in situ by the Danish Institute of Technology. These tests validated the theoretical results and confirmed the achievement of the most restrictive thermal comfort level of the Danish Indoor Climate Label, i.e. Class A, with notably imperceptible residual air velocities (less than 0.18m/s) but also a sound emission of less than 35dBA in open spaces and 30dBA in individual offices.
KHR Arkitekter A/S
Clim® : Profiles and dividers
All our profiles and dividers are 100% recyclable
BarriClim® extra small
Ref.: BXSCLIM312P
Aluminum perforated profile, gap 12 mm
Weight 1,60 kg/ml
Ref.: BXSCLIM312P
Aluminum flap shutter, 12 mm
BarriClim® extra small
Ref.: BXSCLIM424P
Aluminum perforated profile, gap 24 mm
Weight 1,61 kg/ml
Ref.: MP24
Aluminum flap shutter, 24 mm
BarriClim® extra small
Ref.: BXSCLIM532P
Aluminum perforated profile, gap 32 mm
Weight 1,63 kg/ml
Ref.: MP32
Aluminum flap shutter, 32 mm
BarriClim® extra small Séparateur
Ref.: BXSCLIM825
LED separator for ceiling
Weight 1,06 kg/ml
BarriClim® extra small Séparateur
Ref.: BXSCLIM LED
LED separator for ceiling
Weight 2,140 kg/ml
For rooms less than 40 sqm - single sheet
BarriClim® extra small Mini Clim
Ref.: MC1XMS
Non-perforated aluminum profile, gap 20 mm, 25 mm or 30 mm
Weight 0,942 kg/ml
Ref.: MC1XMSP
Perforated aluminum profile, gap 20 mm, 25 mm or 30 mm
Weight 0,850 kg/ml
Ref.: MC2XMS
Aluminum profile, gap 20 mm, 25 mm or 30 mm
Weight 0,721 kg/ml
CARRIER terminal units, for more performance and guarantees
By choosing to couple our Clim® system with a Carrier terminal unit you benefit from :
- A guarantee of thermal comfort performance according to the ISO 7730 standard,,
- An additional year of warranty on the Carrier terminal units and on your Barrisol Barrisol ceiling.
All Carrier terminals and air handling units operating in forced air are compatible with the Clim® system
Examples of Carrier terminals adapted to the Clim® system
CARRIER 42-EP®
Thinnest terminal unit on the market
(150mm), Static pressure up to 100 Pa
Low energy consumption
Power from 0.5 kW to 5 kW
CARRIER 42-NL & 42-NH®
Extremely quiet
Modular horizontal mounting
Low energy consumption
Power from 1.0 kW to 17.0 kW
CARRIER 42-BJ®
Low energy consumption
Static pressure up to 250Pa
Power from 3.6 kW to 6.8 kW
Niedriger Energieverbrauch
CARRIER 42-GR®
Installation in a cupboard or technical room
Low energy consumption
Static pressure up to 400Pa
Power from 2.8 kW to 4.1 kW
The performance of the Clim range associated with Carrier terminal units has been specially tested at the Jean Falconnier laboratory on the Carrier - Culoz site.